C-Max

Our powerful C-Max© Control Wizard software allows you to write simple If-Then-Else programs to make your ADICON 2500™ home automation system do just about anything you want it to do. You can also directly test your discrete inputs and outputs from the various modules you can connect to our Ocelot™ or Leopard™ II controllers, send and receive X10 and infrared commands and so much more! Make sure to go through the C-Max© FAQs in the Applications Notes section.

Click here to download our C-Max© Control Wizard software

Note: For complete C-Max© instructions, download the manual for the controller you are using in the manuals link at the left side of this page.

Simple If-Then-Else commands makes your ADICON 2500™ series do exactly what you want it to do when you want it to do it!

Comes FREE with your Ocelot™ or Leopard™ II controller.
Simple If-Then-Else Commands.
Transmit and receive Infrared commands.
Transmit and receive X10 commands.
Real Time Clock lets you create events at a specific time, day week, year or any combination you desire.
Can combine functions such as transmit a IR command when an X10 command is received, when a certain time is reached, close a relay based on a received IR or X10 command, time of day, when a timer reaches a certain time; the possibilities are endless.
Control up to 128 modules.
Transmit and receive ASCII commands.

And So Much More.

Drop down menus makes creating your program quick and easy!

Monitor the status of all of your modules from the C-Max© Controller Access Screen. You can monitor learn, transmit and receive Infrared commands directly from the Controller Access screen

Transmit X10 commands, including extended and Leviton® X10. You can even monitor X10 being transmitted and received.

Turn relays on and off using our SECU16™ and RLY8XA™, record and transmit audio messages through our Speakeasy™ and transmit ASCII messages through our RS232 and RS485 Bobcat™ modules, all right from our C-Max© Controller Access screen!