T-Max® 3W/G2™

The T-Max® 3W/G2™ can operate as a stand-alone timer or be controlled from the front desk. Up, Down, and Start/Stop buttons allow for easy control of your tanning bed. Terminals that screw down provide flexible and easy wire connections.

All parameters, such as lamp hours, session counts, bed hours, etc. can be accessed and changed right on the T-Max® 3W/G2™. All these features provide an easy to install and inexpensive way to control a tanning bed from the front desk of your salon. Up to eight T-Max® Manager/Pro and/or T-Max® Manager G2s™ can be connected to a single salon.

The T-Max® 3W/G2™ is also wireless ready. It can connect to a G2™ Access Point to communicate throughout your tanning salon without the need to run cables throughout your salon.

For further details on the G2™ Wireless Adapters, click the link here.

The T-Max® 3W/G2 ™can be used as an independent timer, or can be used as a front desk controller to control another T-Max® timer in the tanning room for remote single bed control. The T-Max® 3W/G2™ at the front desk will control the T-Max® timer in the room; whether it's another T-Max® 3W/G2™ or a T-Max® certified timer in the tanning bed.

T-Max® 3W/G2™ Enclosure

The T-Max® 3W/G2™ is designed to fit nicely into a plastic double wide light switch box. If you prefer to hang the T-Max® 3W/G2™ on your wall, a optional slick looking enclosure is available.



Enclosure shown with T-Max® 3W/G2™ Timer (sold separately) attached.

The T-Max® 3W/G2™ Enclosure has teardrop holes on the back for easy wall mounting, and is designed so that the T-Max® 3W/G2™ can be angled either up or down. The T-Max® 3W/G2™ Enclosure is also ideal if you want the T-Max® 3W/G2™ to set on a table or desk.





Cover Plate: 5.25"H x 5.25"W
PCB: 2.5"H x 3.75"H x 1.5"D


9-12V (DC or AC), 200ma


2 digit LED display.


Wired: 2 RJ-22 Connections

Wireless: 1 RJ-11 Connection for connecting to the G2 Access Point
Power: 2 Screw Terminals
Contact: 2 Screw Terminals
TPI: 2 Screw Terminals

External Start: 2 Screw Terminals.


Switching Capability: 270 VAC @ 5A
Configuration: SPST Form A*(up to 14 AWG)


In Wall : Fits in standard double-wide plastic light switch box.
: Optional Plastic Enclosure that screws to T-Max® 3W/G2 allowing it to be mounted to the wall or placed on a flat surface.

Click here to download the T-Max® 3W/G2 Manual